• Check refrigerant and condition of refrigerant lines
• Check / clean condenser coil as needed
• Check / clean evaporator coil as needed
• Check / clean or replace 1” air filter
• Check / clean condensate drain
• Clean blower components
• Check all electrical connections
• Check safety controls
• Check auxiliary heat package
• Check and lubricate all moving parts
• Check reversing valve

• Check heat exchanger *(see download pdf for details)
• Check burner operation
• Check gas valve
• Check flue pipe
• Check / clean or replace 1” air filter
• Check / clean condensate drain
• Clean blower components
• Check all electrical connections
• Check safety controls
• Check emergency shut-off switch
• Check and lubricate all moving parts as needed
• Check thermostat calibration and anticipator
• Check gas line (visual check)
• Clean flame sensor
• Check hot surface ignitor
• Measure temperature rise
• Perform carbon monoxide test

• Check refrigerant and condition of refrigerant lines
• Check / clean evaporator coil as needed
• Check / clean or replace air filter
• Check / clean condensate drain
• Clean blower components
• Check all electrical connections
• Check safety controls
• Check auxiliary heat package
• Check and lubricate all moving parts
• Check reversing valve

• Check / clean flue
• Inspect combustion chamber
• Check / clean or replace 1” air filter
• Replace fuel filter cartridge
• Clean and check chimney base
• Check / clean heat exchanger* (see download pdf for details)
• Check safety controls
• Replace nozzle
• Check and lubricate bearings and motors
• Perform combustion analysis
• Inspect ductwork and connections as able
• Make sure return air inlets are open
• Perform carbon monoxide test

• Change oil
• Change oil filter
• Change air filter
• Test run generator and transfer switch

• Dryer vent inspection
• Cycle all breakers
• Test Arc Fault breakers
• Look for moisture/condensation
• Re-torque any loose connections
• Test GFI receptacles
• Test smoke detectors- replace batteries (up to 3)
• Check bathroom and ceiling fans

• Dye test all toilets for internal leaks
• Check for wax ring seepage
• Check for proper flush

• Inspect for water leaks
• Inspect emergency cut-off
• Inspect temperature and safety valve
• Inspect drain valve
• Inspect operation of elements
• Inspect thermostat operation
• Inspect operation of wiring
• Inspect and clean main burner and pilot
• Inspect flue pipe
• Inspect for proper vent draft
• Inspect for gas leaks
• Perform carbon monoxide test (gas water heaters)

• Inspect all readily accessible plumbing
• Inspect all fixture and drains
• Inspect all washing machine hoses
• All hose bibs will be checked for leaks
• We inspect and tag all emergency shutoffs and water shutoff valves

• All the above Plumbing check list
• Extended water heater warranty (lifetime water heater replacement warranty for all Vertex installed water heaters for contract customers with no lapse in coverage)
• Inspect anode rod